F065
Diameter Nominal Pipa Luar:
- Direkomendasikan oleh Standar Perusahaan HL Cryogenic Equipment. Produk ini juga dapat diproduksi sesuai dengan kebutuhan pelanggan.
- Tekanan Desain:
- Direkomendasikan ≤ 16 bar. Atau pilih Tipe Sambungan Las (≤40 bar).
- Bahan Pipa Luar
Tanpa persyaratan khusus, material pipa dalam dan pipa luar akan dipilih sama.
3.1.3 Jenis Sambungan Las
model
Koneksi
Jenis
Diameter Nominal Pipa Dalam
Tekanan Desain
Bahan
dari Pipa Dalam
Standar
Komentar
W010
00X
Jenis Sambungan Las untuk Selang Fleksibel Berinsulasi Vakum Statis
DN10, 3/8"
8~40 bar
Baja Tahan Karat Seri 300
ASME B31.3
| V | DN20, 3/4" | DN25, 1" | Diameter Nominal Pipa Luar: | |
| Tekanan Desain | Bahan Pipa Bagian Dalam. | A adalah 304, | DN40, 1-1/2" | C adalah 316, |
| D adalah 316L, | HLHS | HLHS | W015 | 00X |
| DN15, 1/2" | No | No | HLHS | Tekanan Desain |
| Nominal Diameter of Inner Pipe | 00X | HLHS | W025 | 00X |
| Design Pressure | HLHS | DN32, 1-1/4" | 00X | DN32, 1-1/4" |
| HLHS | HLHS | HLHS | DN40, 1-1/2" | HLHS |
| Direkomendasikan ≤ DN25 atau 1". Atau pilih Tipe Sambungan Bayonet Vakum dengan Flensa dan Baut (dari DN10, 3/8" hingga DN80, 3"), Tipe Sambungan Las (dari DN10, 3/8" hingga DN150, 6") | 00X | |||
| DN50, 2" | HLHS | |||
| Material | 300 Series Stainless Steel | |||
| Standar | LN2HLHS2W080 | |||
00X
DN80, 3"
| LHSW100 | |
| 00X | |
| DN100, 4" |  |
LHSW125
| 00X | DN125, 5" | LHSW150 | 00X | DN150, 6" | Diameter Nominal Pipa Luar: |
| Direkomendasikan oleh Standar Perusahaan HL Cryogenic Equipment. Produk ini juga dapat diproduksi sesuai dengan kebutuhan pelanggan. | Bahan Pipa Luar | DN25, 1" | DN25, 1" | DN25, 1" | DN25, 1" |
| Jenis | DN25, 1" | DN25, 1" | DN25, 1" | DN25, 1" | |
| Standar | DN25, 1" | DN25, 1" | DN25, 1" | DN25, 1" | |
| DN10, 3/8" | DN25, 1" | DN25, 1" | DN25, 1" | DN25, 1" | |
| Tekanan Desain. | / | DN25, 1" | DN25, 1" | / | |
| Bahan Pipa Bagian Dalam. | / | DN25, 1" | DN25, 1" | / | |
| C adalah 316, | / | DN25, 1" | DN25, 1" | / | |
| HLHS | / | DN25, 1" | DN25, 1" | / | |
| DN15, 1/2" | / | DN25, 1" | DN25, 1" | / | |
| 00X | / | / | DN25, 1" | / | |
| HLHS | / | / | DN25, 1" | / | |
| 00X | / | / | DN25, 1" | / |
Diameter Nominal Pipa Bagian Dalam:
| Direkomendasikan ≤ DN25 atau 1". Atau pilih Tipe Sambungan Bayonet Vakum dengan Flensa dan Baut (dari DN10, 3/8" hingga DN80, 3"), Tipe Sambungan Las (dari DN10, 3/8" hingga DN150, 6") | Diameter Nominal Pipa Luar: |
| Direkomendasikan oleh Standar Perusahaan HL Cryogenic Equipment. Produk ini juga dapat diproduksi sesuai dengan kebutuhan pelanggan. | Tekanan Desain: |
| Direkomendasikan ≤ 16 bar. Atau pilih Tipe Sambungan Las (≤40 bar) | Bahan Pipa LuarTanpa persyaratan khusus, material pipa dalam dan pipa luar akan dipilih sama.3.2 Sistem Pipa Berinsulasi Vakum Dinamis3/S |
| 3.2.1 Jenis Koneksi Bayonet Vakum dengan Penjepit | model |
| Koneksi | Jenis |
| Diameter Nominal Pipa Dalam | Tekanan Desain |
| Bahan | dari Pipa Dalam |
| Standar | Komentar |
HDB01008
Konektor Bayonet Vakum Tipe dengan Penjepit untuk Selang Fleksibel Berinsulasi Vakum Dinamis
lDN10, 3/8"
l8 bar
| Baja Tahan Karat Seri 300 C adalah 316, | Bahan Pipa Bagian Dalam. | |
| A adalah 304, | B adalah 304L,C adalah 316,D adalah 316L, | |
| E adalah lainnya. | HLH | DB01508 |
| DN15, 1/2" | Tekanan Desain: | Tekanan Desain: |
| DN20, 3/4" | Tekanan Desain: | Tekanan Desain: |
| DN25, 1" | Tekanan Desain: | Tekanan Desain: |
| Diameter Nominal Pipa Luar: | Tekanan Desain: | Tekanan Desain: |
Direkomendasikan ≤ 8 bar. Atau pilih Tipe Sambungan Bayonet Vakum dengan Flensa dan Baut (≤16 bar), Tipe Sambungan Las (≤40 bar)Bahan Pipa LuarTanpa persyaratan khusus, material pipa dalam dan pipa luar akan dipilih sama.
Kondisi Daya:
HL-HX-X-Lokasi tersebut perlu memasok daya ke pompa vakum dan memberi tahu HL Cryogenic Equipment informasi listrik setempat (Tegangan dan Hertz).-00-X
3.2.2 Jenis Sambungan Bayonet Vakum dengan Flensa dan Baut
model
Koneksi
Jenis
Diameter Nominal Pipa Dalam
Tekanan Desain
Bahan
dari Pipa Dalam
Standar
Komentar
Nominal Diameter of Inner Pipe
00X
8~16 bar
DN10, 3/8"
8~16 bar
Baja Tahan Karat Seri 300
Design Pressure
Tekanan Desain.
08 adalah 8 bar,
16 adalah 16 bar.
Bahan Pipa Bagian Dalam.
A adalah 304,
B adalah 304L,
C adalah 316,
D adalah 316L,
E adalah lainnya.
F015
00X
| Model | Connection Type | Nominal Diameter of Inner Pipe | Design Pressure | Material of Inner Pipe | Standard | Remark |
| HLHSF040X | Seri Pemisah Fase Berinsulasi Vakum | DN10, 3/8" | Armenia
| 300 Series Stainless Steel | ASME B31.3 | X: Material of Inner Pipe. A is 304, B is 304L, C is 316, D is 316L, E is other. |
| PerancisDiameter Nominal Pipa Luar:X | DN15, 1/2" | |||||
| PerancisDirekomendasikan ≤ 16 bar. Atau pilih Tipe Sambungan Las (≤40 bar).X | DN20, 3/4" | |||||
| PerancisKondisi Daya:X | DN25, 1" |
Nominal Diameter of Inner Pipe: Recommended ≤ DN25 or 1". Or selects the Vacuum Bayonet Connection Type with Flanges and Bolts (from DN10, 3/8" to DN80, 3"), Welded Connection Type (from DN10, 3/8" to DN150, 6")
Nominal Diameter of Outer Pipe: Recommended by the Enterprise Standard of HL Cryogenic Equipment. It also can be produced according to requirement of the customer.
Design Pressure: Islandia
Material of Outer Pipe: Without special requirement, the material of inner pipe and outer pipe will be selected the same.
| Model | Connection Type | Nominal Diameter of Inner Pipe | Design Pressure | Material of Inner Pipe | Standard | Remark |
| Perancis08 adalah 8 bar,00X | dan 25, 32, 40. | DN10, 3/8" | 8~16 bar | 300 Series Stainless Steel | ASME B31.3 | 00: Design Pressure. 08 is 8bar, 16 is 16bar.
X: Material of Inner Pipe. A is 304, B is 304L, C is 316, D is 316L, E is other. |
| Perancisorang Samoa00X | DN15, 1/2" | |||||
| PerancisSindhi00X | DN20, 3/4" | |||||
| PerancisTajik00X | DN25, 1" | |||||
| PerancisThai00X | DN32, 1-1/4" | |||||
| PerancisUzbekistan00X | DN40, 1-1/2" | |||||
| PerancisXhosa00X | DN50, 2" | |||||
| PerancisZulu00X | DN65, 2-1/2" | |||||
| PerancisBahasa Oriya00X | DN80, 3" |
Nominal Diameter of Inner Pipe: Recommended ≤ DN80 or 3". Or selects the Welded Connection Type (from DN10, 3/8" to DN150, 6"), Vacuum Bayonet Connection Type with Clamps (from DN10, 3/8" to DN25, 1").
Nominal Diameter of Outer Pipe: Recommended by the Enterprise Standard of HL Cryogenic Equipment. It also can be produced according to requirement of the customer.
Design Pressure: Kondisi Daya:
Material of Outer Pipe: Without special requirement, the material of inner pipe and outer pipe will be selected the same.
| Model | Connection Type | Nominal Diameter of Inner Pipe | Design Pressure | Material of Inner Pipe | Standard | Remark |
| HLHS00X00X | DN10, 3/8" | DN10, 3/8" | Baja Tahan Karat Seri 300 | 300 Series Stainless Steel | ASME B31.3 | 00: Design Pressure 08 is 8bar, 16 is 16bar, and 25, 32, 40.
X: Material of Inner Pipe. A is 304, B is 304L, C is 316, D is 316L, E is other. |
| PerancisDN15, 1/2"00X | DN15, 1/2" | |||||
| PerancisDN20, 3/4"00X | DN20, 3/4" | |||||
| PerancisDN25, 1"00X | DN25, 1" | |||||
| PerancisW03200X | DN32, 1-1/4" | |||||
| PerancisW04000X | DN40, 1-1/2" | |||||
| PerancisW05000X | DN50, 2" | |||||
| PerancisW06500X | DN65, 2-1/2" | |||||
| PerancisW08000X | DN80, 3" | |||||
| HSelang Jaket Vakum00X | DN100, 4" | |||||
| HKatup Pengatur Aliran Oksigen Cair China00X | DN125, 5" | |||||
| HHarga Grosir China Tangki Standar ISO China 2...00X | DN150, 6" |
Nominal Diameter of Outer Pipe: Recommended by the Enterprise Standard of HL Cryogenic Equipment. It also can be produced according to requirement of the customer.
Material of Outer Pipe: Without special requirement, the material of inner pipe and outer pipe will be selected the same.
| Model | Connection Type | Nominal Diameter of Inner Pipe | Design Pressure | Material of Inner Pipe | Standard | Remark |
| HLHSSistem Pompa Vakum Dinamis00X | Seri Pemisah Fase Berinsulasi Vakum | DN10, 3/8" | 8~16 bar | 300 Series Stainless Steel | ASME B31.3 | 00: Design Pressure. 08 is 8bar, 16 is 16bar.
X: Material of Inner Pipe. A is 304, B is 304L, C is 316, D is 316L, E is other. |
| PerancisWhatsApp00X | DN15, 1/2" | |||||
| PerancisWechat wechat00X | DN20, 3/4" | |||||
| PerancisJerman00X | DN25, 1" |
Nominal Diameter of Inner Pipe: Recommended ≤ DN25 or 1". Or selects the Vacuum Bayonet Connection Type with Flanges and Bolts (from DN10, 3/8" to DN80, 3"), Welded Connection Type (from DN10, 3/8" to DN150, 6")
Nominal Diameter of Outer Pipe: Recommended by the Enterprise Standard of HL Cryogenic Equipment. It also can be produced according to requirement of the customer.
Design Pressure: Orang yunani
Material of Outer Pipe: Without special requirement, the material of inner pipe and outer pipe will be selected the same.
Denmark
| Model | Connection Type | Nominal Diameter of Inner Pipe | Design Pressure | Material of Inner Pipe | Standard | Remark |
| HLLaoX | Vacuum Bayonet Connection Type with Clamps for Dynamic Vacuum Insulated Flexible Hose | DN10, 3/8" | Armenia
| 300 Series Stainless Steel | ASME B31.3 | X:Material of Inner Pipe. A is 304, B is 304L, C is 316, D is 316L, E is other. |
| HLHEstoniaX | DN15, 1/2" | |||||
| HLHFrisiaX | DN20, 3/4" | |||||
| HLHBahasa GujaratiX | DN25, 1" |
Nominal Diameter of Inner Pipe: Recommended ≤ DN25 or 1". Or selects the Vacuum Bayonet Connection Type with Flanges and Bolts (from DN10, 3/8" to DN80, 3"), Welded Connection Type (from DN10, 3/8" to DN150, 6")
Nominal Diameter of Outer Pipe: Recommended by the Enterprise Standard of HL Cryogenic Equipment. It also can be produced according to requirement of the customer.
Design Pressure: Islandia
Material of Outer Pipe: Without special requirement, the material of inner pipe and outer pipe will be selected the same.
Power Condition: The site needs to supply power to the vacuum pumps and inform HL Cryogenic Equipment the local electricity information (Voltage and Hertz).
| Model | Connection Type | Nominal Diameter of Inner Pipe | Design Pressure | Material of Inner Pipe | Standard | Remark |
| HLBahasa Malayalam00X | Suku Maori | DN10, 3/8" | 8~16 bar | 300 Series Stainless Steel | ASME B31.3 | 00: Design Pressure. 08 is 8bar, 16 is 16bar.
X: Material of Inner Pipe. A is 304, B is 304L, C is 316, D is 316L, E is other. |
| HLHDorang Samoa00X | DN15, 1/2" | |||||
| HLHDSindhi00X | DN20, 3/4" | |||||
| HLHDTajik00X | DN25, 1" | |||||
| HLHDThai00X | DN32, 1-1/4" | |||||
| HLHDUzbekistan00X | DN40, 1-1/2" | |||||
| HLHDXhosa00X | DN50, 2" | |||||
| HLHDZulu00X | DN65, 2-1/2" | |||||
| HLHDBahasa Oriya00X | DN80, 3" |
Nominal Diameter of Inner Pipe: Recommended ≤ DN80 or 3". Or selects the Welded Connection Type (from DN10, 3/8" to DN150, 6"), Vacuum Bayonet Connection Type with Clamps (from DN10, 3/8" to DN25, 1").
Nominal Diameter of Outer Pipe: Recommended by the Enterprise Standard of HL Cryogenic Equipment. It also can be produced according to requirement of the customer.
Design Pressure: Recommended ≤ 16 bar. Or selects Welded Connection Type (≤40 bar).
Material of Outer Pipe: Without special requirement, the material of inner pipe and outer pipe will be selected the same.
Power Condition: The site needs to supply power to the vacuum pumps and inform HL Cryogenic Equipment the local electricity information (Voltage and Hertz).
| Model | Connection Type | Nominal Diameter of Inner Pipe | Design Pressure | Material of Inner Pipe | Standard | Remark |
| HLHDW01000X | Welded Connection Type for Dynamic Vacuum Insulated Flexible Hose | DN10, 3/8" | 8~40 bar | Stainless Steel 304, 304L, 316, 316L | ASME B31.3 | 00: Design Pressure 08 is 8bar, 16 is 16bar, and 25, 32, 40. .
X: Material of Inner Pipe. A is 304, B is 304L, C is 316, D is 316L, E is other. |
| HLHDW01500X | DN15, 1/2" | |||||
| HLHDW02000X | DN20, 3/4" | |||||
| HLHDW02500X | DN25, 1" | |||||
| HLHDW03200X | DN32, 1-1/4" | |||||
| HLHDW04000X | DN40, 1-1/2" | |||||
| HLHDW05000X | DN50, 2" | |||||
| HLHDW06500X | DN65, 2-1/2" | |||||
| HLHDW08000X | DN80, 3" | |||||
| HLHDW10000X | DN100, 4" | |||||
| HLHDW12500X | DN125, 5" | |||||
| HLHDW15000X | DN150, 6" |
Nominal Diameter of Outer Pipe: Recommended by the Enterprise Standard of HL Cryogenic Equipment. It also can be produced according to requirement of the customer.
Material of Outer Pipe: Without special requirement, the material of inner pipe and outer pipe will be selected the same.
Power Condition: The site needs to supply power to the vacuum pumps and inform HL Cryogenic Equipment the local electricity information (Voltage and Hertz).
| Model | Connection Type | Nominal Diameter of Inner Pipe | Design Pressure | Material of Inner Pipe | Standard | Remark |
| HLHDT01000X | Vacuum Bayonet Connection Type with Clamps for Dynamic Vacuum Insulated Flexible Hose | DN10, 3/8" | 8~16 bar | 300 Series Stainless Steel | ASME B31.3 | 00: Design Pressure. 08 is 8bar, 16 is 16bar.
X: Material of Inner Pipe. A is 304, B is 304L, C is 316, D is 316L, E is other. |
| HLHDB01500X | DN15, 1/2" | |||||
| HLHDB02000X | DN20, 3/4" | |||||
| HLHDB02500X | DN25, 1" |
Nominal Diameter of Inner Pipe: Recommended ≤ DN25 or 1". Or selects the Vacuum Bayonet Connection Type with Flanges and Bolts (from DN10, 3/8" to DN80, 3"), Welded Connection Type (from DN10, 3/8" to DN150, 6")
Nominal Diameter of Outer Pipe: Recommended by the Enterprise Standard of HL Cryogenic Equipment. It also can be produced according to requirement of the customer.
Design Pressure: Recommended ≤ 16 bar. Or selects the, Welded Connection Type (≤40 bar)
Material of Outer Pipe: Without special requirement, the material of inner pipe and outer pipe will be selected the same.
Power Condition: The site needs to supply power to the vacuum pumps and inform HL Cryogenic Equipment the local electricity information (Voltage and Hertz).
